Buffalo Technology WHR-G54S Bedienungsanleitung PDF herunterladen (Seite 65)

DIAG LED Activity Table

DIAG LED Display Time Description/Action

Continuous Red Starting RAM Error Red ash, 2 times Starting Flash

ROM Error

Red ash, 3 times Starting A problem on the wired LAN side

Red ash, 4 times Starting A problem on the wireless LAN side

LEDs Work But Client PC Cannot Connect to Network

If the LEDs indicate that the network is working properly (Power LED is on, Transmit/

Receive LED blinks), check the TCP/IP settings of the network.

Changing Client TCP/IP Settings in Windows

Consult the LAN Administrator for correct TCP/IP settings.

To add or change TCP/IP Settings:

1. On the Windows task bar, click Start.

2. Select Settings, then Control Panel.

3. Double-click on the Network icon to view Network Properties.

4. From the list of installed components, verify the TCP/IP => wireless LAN adapter

protocol is installed.

Troubleshooting

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 92 93

Keine Kommentare

Buffalo Technology WHR-G54S Bedienungsanleitung Seite 65