Buffalo Technology TS-RITGL/R5 Bedienungsanleitung

User ManualTeraStation iSCSI TS-RITGL/R5www.buffalotech.comv1.4

10Once the TeraStation is installed, you’ll need to install the iSCSI connection tool. Click Next, then continue to click Next, stepping through the

11Make sure that your ISCSI TeraStation is selected in the Target product window. Click Register the iSCSI Hard Disk, and then OK. Installation (iSCS

12Installation (Disk Management)If Disk Management does not open automatically, you may launch it manually. From the Setup menu at the top of the win

13InstallationThe Initialize and Convert Disk Wizard will open. Use it to convert your new volumes to dynamic volumes. Put a checkmark next to each

14Choose your desired volume type. Use Simple if you have only one volume to mount. Spanned and Striped volumes require multiple disk volumes to cre

15InstallationChoose your desired drive letter. Click Next.Choose your desired format and volume label. Click Next.Your new volume is installed and

16The Conguration GUI is where most of the TeraStation’s settings can be changed. To access it, type the IP address of your TeraStation into the URL

17The login prompt will appear. Enter admin for the user name. Until you change it, the password for the admin account will be password. Press the

18Welcome to the conguration GUI for the TeraStation! You are now at Home. Notice that the Home button is lit up in yellow. You can navigate this

19You may modify your TeraStation’s hostname and description under Hostname Setup. A friendly, easy-to-remember name (e.g. “TeraStation”) is recommen

2IntroductionCongratulations on your new TeraStation! Your TeraStation iSCSI is a huge block of iSCSI storage, ready to add to your server or PC via

20By default, the admin password is “password”. Change it to something more secure here. Admin PasswordConguration GUI

21Network (IP Address Properties)In most networks, TeraStation will get its IP Address automatically from a DHCP server. You may disable DHCP here.

22Disk Management (Drive Properties)This page shows the current properties of your hard drives and RAID Arrays. To change these settings, click on RA

23TeraStation uses RAID (“Redundant Array of Independent Disks”) technology to control the four hard drives in your TeraStation. RAID may be congure

24Disk Management (RAID Setup)This page shows your current RAID arrays. You may delete old arrays or create new ones by clicking on the underlined RA

25Disk Management (Disk Erase)Disk Erase removes all data from the selected disk. This may take several hours to complete. It cannot be undone.Cong

26Volume SettingsHere you can enable or disable volumes, shares, and folders.Conguration GUI

27Maintenance (Notication)If your TeraStation is remotely managed, you may choose to receive nightly status reports and be notied of any disk events

28Maintenance (UPS Settings)You may enable Synchronize with UPS and UPS Shutdown Conditions from this page. Consult your Uninterruptable Power Supply

29UPS CongurationMaintenance (UPS Settings)This is TeraStation’s serial port pin assignment for serial UPS products.

3Table of ContentsTeraStation Layout...4Installation ...

30Maintenance (Alert Settings)Alerts can be congured on the TeraStation to make audible noises when a problem is detected. Along with the audible no

31Maintenance (Status LCD)The Status LCD Setup allows conguration for the LCD display on the front of TeraStation. Please select the type

32Maintenance (Syslog Transfer)Check Enable to allow system logs to be transferred. Press Apply once all of the settings have been congured.Congura

33Maintenance (Shutdown)From the Shutdown page, press Apply to shutdown TeraStation. This has the same function as holding down the power button on t

34Maintenance (Initialization)Initialization is a reset procedure that restores all settings back to the default, out of box, conguration. All cong

35This page shows you the System Information for your TeraStation.Firmware updates are occasionally available from www.buffalotech.com for the

36System Status (USB Details)This page shows you details on USB hard drives and UPSs plugged into your TeraStation.Conguration GUI

37System Status (Drive Properties)This page shows you the properties of all hard drives and RAID arrays in and attached to your TeraStation.Congurati

38System Status (Network Information)This page shows you the System Information for your network connection.Conguration GUI

39Log InformationThis page lets you save or display system log information. Choose the log you want from the Log Type dropdown and click Save. The d

4LayoutPower SwitchDisplay Mode SwitchFront Panel lock(Turn counter-clockwise to release)

40 If TeraStation encounters a disk error, it will be reported in the TeraStation status on the top of any of the Web-Based conguration screens. Ru

41Error Code Description Alert SoundE00 MPU error: Main MPU is not responding. AE01 Error on DRAM DATA LIN AE02

42Replacing a Hard Drive Pull on the right hand side of the front panel to remove it.Turn the key counterclockwise to unlock the front panel.

43Replacing a Hard Drive Squeeze the tabs gently and swing the tray latch upward.Slide out the drive tray.

44Pull the plug straight out.Lower the drive carefully to the work surface.Replacing a Hard Drive

45To remove the hard drive from its cage, set the assembly on a soft surface and remove these four screws. Replacing a Hard Drive

46Install a new hard drive by doing the same steps in reverse order: Begin by screwing the new hard drive into the cage.Plug the power/data connector

47Technical SpecicationsLAN Standards: IEEE 802.3u 100BASE-TX; IEEE 802.3 10BASE-TTransmission Types: 1000Mbps/100Mbps/10Mbps; 100BASE-TX 4B/5B,

48Contact Information (North America)Buffalo Technology USA Inc.11100 Metric Blvd, Suite 750Austin, TX 78758GENERAL INQUIRIES Monday through Friday

49Buffalo Technology UK Ltd.2 Bracknell Beeches, Old Bracknell LaneBracknell, Berkshire, SL1 4RDUnited KingdomGENERAL INQUIRIES Email: sales@buffal

5LayoutHard Drives(Squeeze tabs to release)Init Button (Hold down to reset all settings)

50Thank you for your interest in Buffalo products. Our GPL software delivery policy is outlined below.For each individual product and revision, please

51Thank you for your interest in Buffalo products. Our GPL software delivery policy is outlined below.For each individual product and revision, please

6USB inLayoutPower Cable Ethernet(to router)UPS

7Insert the TeraNavigator CD into your computer’s CD-ROM drive.On a PC, setup should automatically launch. If it does not, manually launch setup.exe

8Press the Begin Installation button to begin.Easy Setup will step you through physically connecting your TeraStation. It will then install software.

9If your TeraStation is connected correctly when you get to this window, it will be highlighted in the drop-down list. If you have multiple units to